Some of Our Equipment...

3D Bioprinter

3D Bioprinter

RegenHU 3DDiscovery (bench-top) 2 print heads: pressure-driven & direct dispensing (temperature control) Resolution: ± 5 μm Compatible with: .stl files, printer software, G-code

3D Printer

3D Printer

LulzBot TAZ Workhorse Print technology: fused filament fabrication Print area: 28 cm X 28 cm X 28 cm Nozzle temperature: up to 290°C Layer resolution: 50-400 um Positional resolution (XYZ): 10, 10, 1 um

Flow Cytometer

Flow Cytometer

BD AccuriTM C6 4 fluorescence detectors Cell characterization & phenotyping Absolute cell counts

Fluorescence Microscope

Fluorescence Microscope

Olympus IX81 motorized inverted microscope Spinning-disk confocal Channels: DAPI, FITC, TRITC & phase contrast Objectives: 10x, 20x, 40x & 60x Live-cell imaging capability (humidified with CO2 and temperature control) Accommodates well plates, slides, and custom formats

Inverted Microscope

Inverted Microscope

VWR Inverted Microscope (phase contrast) Routine observation of cultured cells Additional equipment: 2 incubators and 2 biological safety cabinets for animal cell culture (biosafety level 2)

Nozzle Microencapsulator

Nozzle Microencapsulator

Nisco VAR1 encapsulation unit Electrostatically driven With syringe pump option

Refrigerated Centrifuge

Refrigerated Centrifuge

Sorvall Legend RT+ Rotors: 75006445 (max 4600 rpm) and IEC 8947 Adaptors: tubes (15ml and 50ml) and well plates

Get in touch

McGill University, Department of Chemical Engineering, Wong 4300

3610 University Street, Montréal, QC, Canada H3A 0C5

Tel 514.398.4275 E-mail corinne.hoesli@mcgill.ca

  • LinkedIn Social Icon
  • Twitter

STEM CELL BIOPROCESSING LABORATORY - McGill University

© 2020 All rights reserved

Inverted Microscope

VWR Inverted Microscope (phase contrast) Routine observation of cultured cells Additional equipment: 2 incubators and 2 biological safety cabinets for animal cell culture (biosafety level 2)